ICFs Bracing System
Turnbuckle bracing consists of four basic components.
A steel or aluminum “strongback” is attached to the ICF wall,
usually after the first three courses are stacked, to keep the forms straight.
These are available in various lengths.
Near the top, a platform bracket for scaffold planking juts out from the strongback.
Sometimes this bracket is attached as a separate piece, on other systems, it folds out.
The platform often includes a slot for a safety handrail to slide into place.
Running diagonally from the platform to the ground is the turnbuckle, or leg kit, which contains a heavy-duty threaded rod.
At the lower end of the leg is the footplate, which is fastened securely to the ground.
By turning the threaded shaft, the wall can be adjusted for plumb, even after being filled with concrete.
It requires onsite fabrication, but the cost is far lower than all-metal-systems, and has full adjustability.
Spacing between braces is determined by a number of factors, primarily wind loads on the wall, concrete pressures during the pour, and the length of scaffolding planks. Nearly always, this works out to be no more than 5 to 6 feet apart, regardless of the brand of ICF used. Additional braces are needed near window and door openings, on corners, and T-intersections.
U channel length :2700 mm,width:135 mm,both side height:60 mm,wall thickness: 3 mm
Support foot diameter: 40 mm,length: 1600 mm,wall thickness :2 mm
Triangle bracket: 40 mm x 40 mm,wall thickness :2 mm
additional pole:40*40* L:1100 mm * wall thickness 2 mm
All parts galvanized surface treatment .
stable structure house can be used continuously for decades.
| Product Name | ICFs Bracing System |
| Dimension | 3000mm |
| Shape | Rectangle |
| Weight | 30kgs |
| Pin | 3pcs |
| EPS Density | 30-45kg/m³ or customized |
| Energy saving | 90% |
| Application | standard tool for building Support |
| MOQ | 50pieces |
